Installing The Serial Interface Board (Option) - Kyocera KM-C2520 Service Manual

Hide thumbs Also See for KM-C2520:
Table of Contents

Advertisement

1-2-7

Installing the serial interface board (option)

Procedure
1. Turn the main power switch off and discon-
nect the power cord plug from the AC outlet.
2. Open the interface cover.
3. Remove the CF cover.
4. Remove the two screws and then remove
the printer PWB.
Remove the PWB carefully not to allow its
bottom come in contact with the three pro-
trusions on the interface cover.
5. Remove the two screws and then remove
the slot cover of slot (OPT).
6. Insert the serial interface board into the slot
(OPT).
7. Connect the cable's connector (A) to the
serial interface board's connector.
8. Connect the cable's connector (B) to the
printer PWB's connector (YC9).
CF cover
Printer PWB
Screw
Cable
Connector (B)
Printer PWB
Connector (YC9)
2FZ/2F0/2HC-4
Interface cover
Slot (OPT)
Slot cover
Figure 1-2-28
Connector (A)
Serial interface board
Connector
Figure 1-2-29
Screw
Screw
Screw
Slot (OPT)
1-2-19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Km-c3225Km-c3232

Table of Contents