Kyocera KM-C2520 Service Manual page 255

7. Remove YC19 and YC20 connectors of the
main PWB, and release the wire from the
wire saddle.
8. Remove YC7 and YC25 connectors of the
main PWB, and then pull connectors out
from the opening on the machine right.
9. Remove the connector and two screws, and
then remove the main fan motor.
10. Release the wire from edging and wire sad-
dles on the machine right.
Wire saddles
Opening
Main fan motor
Figure 1-5-70
YC20
YC25
YC7
Wire saddle
Figure 1-5-69
Connector
Wire saddles
Wire saddles
Wire
Figure 1-5-71
2FZ/2F0/2HC-4
YC19
Edging
1-5-33