Kyocera KM-C2520 Service Manual page 241

7. Open left cover 1 and paper conveying unit.
8. Remove the YC 10 connector of the feed
PWB and pull the connector out on machine
left through the edging of the machine rear
frame.
9. Remove the screws and washers at the
front and rear bands on left cover 1.
10. Raise the pin of L type of the left cover 1
rear and slide the pin to machine front.
Screw
Washer
Rear band
Pin
YC10
Connector
Feed PWB
Figure 1-5-38
Left cover 1
Figure 1-5-39
2FZ/2F0/2HC-4
Edging
Connector
Screw
Washer
Front band
1-5-19