Kyocera KM-C2520 Service Manual page 240

2FZ/2F0/2HC
(4) Detaching and refitting the laser scanner unit
Follow the procedure below to replace the laser scanner unit.
Procedure
1. Remove fifteen screws and then remove the
rear cover (see page 1-5-9).
2. Remove two straps and then remove left
cover 2.
3. Remove cassette 1 and 2.
4. Remove two screws and inserted parts, and
then remove front left cover 2.
5. Remove two screws and then remove left
lower cover 1.
6. Remove three screws and then remove the
left lower cover 2.
1-5-18
Strap
Figure 1-5-35
Figure 1-5-36
Left lower cover 2
Figure 1-5-37
Left cover 2
Front left cover 2
Left lower cover 1