Kyocera KM-C2520 Service Manual page 263

13. Remove the LSU cleaning clutch from the
LSU cleaning unit.
14. Replace the LSU cleaning clutch and install
the clutch to LSU cleaning unit.
Note: When replacing the clutch, align the
protrusion with cam as diagrammed.
15. Refit the LSU cleaning unit.
16. Refit the paper conveying guide unit.
Note: When installing the guide unit, use
care not to tuck the plastic tabs under the
guide unit.
17. Refit the conveying drive unit.
18. Refit the transfer high voltage PWB 2, inner
left cover and front cover.
19. Refit cassette 1 and image formation holder.
20. Refit the middle guide unit, conveying guide
and paper conveying unit.
21. Refit front left cover 1, rear cover, right cover
and interface cover.
LSU cleaning clutch
Figure 1-5-91
Protrusion
LSU cleaning clutch
Protrusion
LSU cleaning
clutch
Cam
Figure 1-5-92
Paper conveying guide unit
Figure 1-5-93
2FZ/2F0/2HC-4
LSU cleaning unit
Cam
Plastic tabs
1-5-41