Kyocera KM-C2520 Service Manual page 63

Maintenance
item No.
Adjusting the DP magnification
U070
Description
Adjusts the DP original scanning speed.
Purpose
Make the adjustment if the magnification is incorrect in the auxiliary scanning direction when the optional DP
is used.
Adjustment
1. Press the start key.
Description
Original conveying motor speed
2. Press the interrupt key.
3. Place an original on the DP and press the start key to make a test copy.
4. Change the setting value using the cursor up/down keys.
For copy example 1, increase the value.
For copy example 2, decrease the value.
5. Press the start key. The value is set.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following adjustments in
maintenance mode.
U070
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Original
U071 U404
(P.1-3-24) (P.1-3-73)
Description
Setting
range
-25 to 25
Copy Copy
example 1 example 2
Figure 1-3-9
2FZ/2F0/2HC
Initial Change in
setting value per step
0 0.1 %
1-3-23