Kyocera KM-C2520 Service Manual page 91

Maintenance
item No.
Setting the paper size for the paper feeder
U208
Description
Sets the size of paper used in optional 3000-sheet paper feeder.
Purpose
To change the setting when installing the optional 3000-sheet paper feeder or the size of paper used in the
paper feeder is changed.
Setting
1. Press the start key.
2. Select the paper size (A4, B5 or 11 x 8.5).
Initial setting: 11 x 8.5 (Inch specifications)
A4 (Metric specifications)
3. Press the start key. The setting is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Setting punch destination
U234
Description
Sets the destination of optional punch unit of 3000-sheet document finisher.
Purpose
To be set when installing a different punch unit from the destination of the machine.
Setting
1. Press the start key.
2. Select the destination.
Display
NOTHING
JAPAN METRIC
INCH
EUROPE METRIC
Initial setting: NOTHING
3. Press the start key. The setting is set.
4. Turn the main power switch off and on.
Description
Description
With no punch unit
Metric (Japan) specifications
Inch (North America) specifications
Metric (Europe) specifications
2FZ/2F0/2HC-5
1-3-51