Kyocera KM-C2520 Service Manual page 166

2FZ/2F0/2HC-5
Section Jam code
Duplex 60
section Duplex paper conveying
section 1
61
Duplex paper conveying
section 2
Optional DP 70
No original feed
71
An original jam in the orig-
inal feed/conveying sec-
tion
72
An original jam in the orig-
inal feed/conveying sec-
tion 2
73
An original jam in the orig-
inal conveying section
74
An original jam in the orig-
inal registration section
75
An original jam in the orig-
inal registration section
76
An original jam in the orig-
inal feed/conveying sec-
tion
78
DP cover open
Optional 09
3000-sheet Paper feeder sequence
paper error
feeder
Optional 80
finisher Jam between the finisher
and machine
1-4-6
The duplex jam detection switch (DUJDSW) does not turn on
within specified time of the feedshift switch (FSSW) turning on.
The duplex jam detection switch (DUJDSW) does not turn off
within specified time of the feedshift switch (FSSW) turning off.
The registration switch (RSW) does not turn on within speci-
fied time of the duplex jam detection switch (DUJDSW) turning
on.
The registration switch (RSW) does not turn off within speci-
fied time of the duplex jam detection switch (DUJDSW) turning
off.
In the single-sided or double-sided original mode, primary
original feed does not start.
During the secondary original feed in the single-sided original
mode, the DP timing switch (DPTSW) does not turn on within
specified time.
During the secondary original feed in the single-sided original
mode, the original feed switch (OFSW) or original switchback
switch (OSBSW) does not turn off within specified time.
During original switchback operation in the double-sided origi-
nal mode, the original feed switch (OFSW) or original switch-
back switch (OSBSW) does not turn off within specified time.
During the secondary original feed in the single-sided or dou-
ble-sided original mode, the DP timing switch (DPTSW) does
not turn off within specified time.
The original switchback switch (OSBSW) does not turn on
within specified time.
In the single-sided original mode, the DP timing switch
(DPTSW) does not turn on within specified time.
In the double-sided original mode, the DP timing switch
(DPTSW) does not turn on within specified time.
In the single-sided original mode, the original feed switch
(OFSW) does not turn off within specified time.
In the double-sided original mode, the original switchback
switch (OSBSW) does not turn off within specified time.
During the secondary original feed in the single-sided original
mode, the original switchback switch (OSBSW) does not turn
on within specified time.
DP cover is open.
Sequence error is occurred between the machine and paper
feeder.
Paper ejection is not output from the machine to the document
finisher within specified time of the paper entry sensor (PES)
turning on.
Conditions Specified
time
3006 ms
3006 ms
1427 ms
1427 ms
-
1740 ms
5956 ms
4318 ms
3784 ms
2045 ms
1740 ms
907 ms
5956 ms
4318 ms
2774 ms
-
-
15 s