Kyocera KM-C2520 Service Manual page 168

2FZ/2F0/2HC-5
Section Jam code
Optional 87
finisher Jam in eject section of
internal tray 2 (3000-sheet
document finisher only)
88
Jam in eject section of
main tray (3000-sheet
document finisher only)
89
Jam in centerfold unit
(3000-sheet document fin-
isher only)
90
Jam in mailbox (3000-
sheet document finisher
only)
1-4-8
Internal tray entry sensor 2 (ITPES2) does not turn on within
specified time of the paper entry sensor (PES) turning on.
Internal tray entry sensor 2 (ITPES2) does not turn off within
specified time of the paper entry sensor (PES) turning off.
Eject switch 1 (ESW1) is not turned on within specified time.
The centerfold paper entry sensor (CPES) does not turn off
within specified time of centerfold paper conveying sensor
(CPCS) turning on.
The centerfold paper entry sensor (CPES) does not turn on
within specified time of centerfold paper conveying sensor
(CPCS) turning on.
The centerfold paper entry sensor (CPES) is not turned off
within specified time of its turning on.
The centerfold eject switch (CESW) is not turned on within
specified time.
The centerfold eject switch (CESW) is not turned off within
specified time of its turning on.
Centerfold side registration sensor 1 (CSRS1) is not turned on
within specified time.
Centerfold side registration sensor 2 (CSRS2) is not turned on
within specified time.
The home position is not detected within the specified time
after driving the centerfold staple motor (CSTM).
The centerfold paper conveying sensor (CPCS) is not turned
off within specified time.
The centerfold paper conveying sensor (CPCS) is not turned
on within specified time.
The centerfold paper conveying sensor (CPCS) is not turned
off within specified time of its turning on.
The mail paper entry switch (MPESW) is not turned on within
specified time.
The mail paper entry switch (MPESW) is not turned off within
specified time of its turning on.
The tray eject sensor (TEJS) does not turn on within specified
time of mail paper entry switch (MPESW) turning on.
The tray eject sensor (TEJS) is not turned off within specified
time of its turning on.
Conditions Specified
time
4059 ms
1371 ms
1324 ms
1370 ms
1370 ms
2313 ms
4800 ms
8200 ms
600 ms
600 ms
1000 ms
5302 ms
5302 ms
2313 ms
1539 ms
3500 ms
3065 ms
1736 ms
3500 ms