Kyocera KM-C2520 Service Manual page 182

2FZ/2F0/2HC-6
Partial operation control
If one of the following service codes is detected, partial operation control will be activated. Take actions to clear the cause
of the trouble and perform maintenance item U906 to reset partial operation control.
Code
C0840 Faults of RTC
C1010 Lift motor 1 error
C1020 Lift motor 2 error
C1030 Paper feeder lift motor 1 error (optional paper feeder)
C1040 Paper feeder lift motor 2 error (optional paper feeder)
C1100 Paper feeder lift motor 1 error (optional 3000-sheet paper feeder)
C1110 Paper feeder lift motor 2 error (optional 3000-sheet paper feeder)
C1120 Paper feeder left lift position problem (optional 3000-sheet paper feeder)
C1130 Paper feeder right lift position problem (optional 3000-sheet paper feeder)
C9060 EEPROM problem (optional DP)
Measures against the service codes detecting fuser problems
If one of the following service codes is detected, take actions to clear the cause of the trouble and perform maintenance
item U163 to reset the service code.
Code
C6000 Fuser heater 1/2 break
C6010 Abnormally high fuser thermistor temperature
C6020 Abnormally high fuser thermistor 1/3 temperature
C6030 Fuser thermistor 1/3 break error
C6050 Abnormally low fuser thermistor 3 temperature
C6100 Fuser heater 3 break
C6120 Abnormally high fuser thermistor 2 temperature
C6130 Fuser thermistor 2 break error
C6400 Zero-cross signal error
1-4-22
Contents
Contents