Kyocera KM-C2520 Service Manual page 84

2FZ/2F0/2HC-3
Maintenance
item No.
Setting for toner applying operation
U147
Description
Sets the mode for removing charged toner in the developing unit (T7 control: Toner applying operation).
Purpose
Changing settings are not required. However, when the documents with lower print density (e.g. less than 2%)
should customarily printed in a great volume, mode must be changed.
If the charged toner stays inside the developing unit, density decreases.
Method
1. Press the start key.
2. Select the item to be set. The setting screen for the selected item is displayed.
Display
Transition Time
Set Operation Mode
Upper Limit
Sleeve Cleaning Interval
Set Drum Cleaning Mode
Set Minimum Value
Setting for duration of toner applying
1. Change the setting value using the cursor up/down keys.
Description
Duration of toner applying
2. Press the start key. The value is set.
Setting for toner applying operation
1. Select the item to be set.
Display
OFF
MODE1
MODE2
MODE3
Initial setting; MODE1
2. Press the start key. The setting is set.
Setting for MODE3
1. Select the item to be set.
2. Change the setting value using * key or # key.
Display
Black
Cyan
Magenta
Yellow
3. Press the start key. The setting is set.
1-3-44
Description
Description
Duration of toner applying
Settings for toner applying operation
Upper limit printing ratio of toner applying quantity with each mode
Toner collection operational interval on developing sleeve after the
toner applying operation (T7 control)
Settings for developing the toner layer in accordance with coverage
ratio
Toner layer width when [Set Drum Cleaning Mode] is selected
Description
Do not applying the toner operation
Normal mode
Toner consumption mode
Normal mode (setting value is changed possibility)
Description
The magnification ratio which is multiplied in the
toner applying quantity (black)
The magnification ratio which is multiplied in the
toner applying quantity (cyan)
The magnification ratio which is multiplied in the
toner applying quantity (magenta)
The magnification ratio which is multiplied in the
toner applying quantity (yellow)
Setting range Default setting
0 to 255 (s) 70
Setting
range
0 to 5.0
0 to 5.0
0 to 5.0
0 to 5.0
Default
setting
1.0
1.0
1.0
1.0