Kyocera KM-C2520 Service Manual page 127

Maintenance
item No.
Checking/clearing finisher punch count
U902
Description
Sets the punch limit and displays and clears the punch-hole scrap count when optional 3000-sheet finisher is
installed.
Purpose
Sets the punch limit to notify the user of the time to collect punch-hole scrap. Also, used to manually clear the
punch-hole scrap count if a message requiring collection of punch-hole scrap is shown on the touch panel
after collection. If punch-hole scrap is collected with the machine power turned off, the punch-hole scrap count
is not cleared and consequently this problem occurs.
Setting
1. Press the start key.
2. Select the item.
3. Change the value using the numeric keys.
Display
PUNCH LIMIT
PUNCH COUNT
4. Press the start key. The value is set.
Clearing
1. Press the reset key.
2. Press the start key. The count is cleared, and the screen for selecting a maintenance item No. is dis-
played.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Checking/clearing the paper jam counts
U903
Description
Displays or clears the jam counts by jam locations.
Purpose
To check the paper jam status. Also to clear the jam counts after replacing consumable parts.
Start
Press the start key. The screen for selecting an item is displayed.
Display
COUNT
TOTAL COUNT
Method: Displays/clears the jam counts
1. Select [COUNT].
The count of jam code by type is displayed.
2. Change the screen using the * or # keys.
Press the reset key and then press the start key. The all count is cleared.
The individual counter cannot be cleared.
To return to the screen for selecting an item, press the stop/clear key.
Method: Displays the total jam counts
1. Select [TOTAL COUNT] at the screen for selecting an item.
The total number of jam code by type is displayed.
2. Change the screen using the * or # keys.
The total number of jam count cannot be cleared.
To return to the screen for selecting an item, press the stop/clear key.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Description
Description
Punch limit (maximum number of punching times)
Punch-hole scrap count (current number of punching
times)
Description
Displays/clears the jam counts
Displays the total jam counts
2FZ/2F0/2HC
Setting range
0 to 9999000
0 to 9999999
1-3-87