Kyocera KM-C2520 Service Manual page 110

2FZ/2F0/2HC-3
Maintenance
item No.
Setting the cassette heater ON/OFF
U327
Description
Sets ON/OFF of the cassette heater.
Purpose
To change the setting when dew condensation on the drum is heavy.
Setting
1. Press the start key.
2. Select ON or OFF.
Display
ON
OFF
Initial setting: OFF
3. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Setting the size conversion factor
U332
Description
Sets the coefficient of nonstandard sizes in relation to the A4/11" x 8
to convert the black ratio in relation to the A4/11" x 8
Purpose
To set the coefficient for converting the black ratio for nonstandard sizes in relation to the A4/11" x 8
for copying printing and fax respectively.
Setting
1. Press the start key.
2. Select copying (COPY), printing (PRT) or fax (FAX).
3. Change the setting using the cursor up/down keys.
Display
COPY
PRT
FAX
4. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
Press the stop/clear key. The screen for selecting a maintenance item is displayed.
Specific paper feed location setting for printing function
U341
Description
Sets a paper feed location specified for printer output (only if a printer kit is installed).
Purpose
To use a paper feed location only for printer output.
A paper feed location specified for printer output cannot be used for copy output.
Method
1. Press the start key.
2. Select the paper feed location for the printer.
Two or more cassette can be selected.
Selection is canceled when the selected item is pressed again.
3. Press the start key. The setting is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
1-3-70
Description
Description
Cassette heater ON
Cassette heater OFF
Description
Size parameter for copying
Size parameter for printing
Size parameter for fax
" size. The coefficient set here is used
1/2
" size and to display the result in user simulation.
1/2
Setting range
0.1 to 3.0
0.1 to 3.0
0.1 to 3.0
" size
1/2
Default
setting
1.0
1.0
1.0