Kyocera KM-C2520 Service Manual page 148

2FZ/2F0/2HC
Setting time difference
Set the time difference.
Set the time difference before Adjusting Date/Time.
1. Select [Time difference] using the cursor up/down
keys and press [Change #].
2. Press [+] or [-] to set the time difference.
Changing management code
Change the machine's management code.
The default setting is 2500 for the 25/20 ppm model and
3200 for the 32/25 and 32/32 ppm models.
If the optional security kit has been installed, the default
setting is 25002500 for the 25/20 ppm model and
32003200 for the 32/25 and 32/32 ppm models.
1. Select [Management code change] ([Change
MGMT code with #]) using the cursor up/down keys
and press [Change #].
2. Use the numeric keys to enter the new manage-
ment code between 0000 - 9999. If the optional
security kit has been installed, the management
code is 8 digits long.
Activating auto sleep
In Auto Sleep mode, the machine automatically switches
to Sleep mode if left idle for a preset period.
If Auto Sleep mode interferes with normal operation, set
to disable Auto Sleep mode. Before disabling Auto Sleep
mode, it is first recommended to try extending the time
until Auto Sleep mode is activated (sleep mode change
time).
1. Select [Auto sleep] using the cursor up/down keys
and press [Change #].
2. Select [Off] or [On].
Activating auto clear
Auto Clear automatically releases various specified set-
ting and returns to default settings mode after a specified
period of time since the last device operation.
1. Select [Auto Clear] using the cursor up/down keys
and press [Change #].
2. Select [Off] or [On].
High density print
Set priority between printing speed and image quality
when continuously printing high density originals.
1. Select [High Density Print] using the cursor up/
down keys and press [Change #].
2. Select [Fast Mode], [Quality Mode] or [High Qual.
Mode].
Prioritizing copying over printing
Prioritize copy jobs over printer jobs in the job output
queue.
1. Select [Copy Job Priority] using the cursor up/down
keys and press [Change #].
2. Select [Off] or [On].
1-3-108
Erasing hard disk contents
When the optional security kit is installed, select the hard
disk overwrite method.
This setting is available when optional security kit is
installed.
1. Select [Hard Disk Overwrite] using the cursor up/
down keys and press [Change #].
2. Select [3-time Overwrite] or [Once Overwrite].
Setting hard disk encryption key
When the optional security kit is installed, you can specify
an encryption key.
This setting is available when optional security kit is
installed.
1. Select [HDD Encryption Key] using the cursor up/
down keys and press [Change #].
2. Press [Change #] for [Encryption Key].
3. Enter a 16 character encryption key and press
[End].
4. To confirm the entry, press [Change #] under [Con-
firm Encryption Key], enter the same key again,
and press [End].
5. Press [Close].
6. Press [Yes]. The hard disk data is overwritten and
the specified encryption key is enabled.