Kyocera KM-C2520 Service Manual page 109

Maintenance
item No.
Setting the bias between pages
U325
Description
Determines the distance between two pages when printing pages of high print coverage.
Purpose
To change the setting when pages are not printed continuously due to an intermittent toner replenishing that
may happen when attempting to print a highly dense document.
Setting
1. Press the start key.
2. Select ON or OFF.
Display
ON
OFF
Initial setting: OFF
Setting: ON
Print coverage ratio
Over 20 % to below 30 %
Over 30 % to below 40 %
Over 40 % to below 50 %
Over 50 % to below 60 %
Over 60 % to below 70 %
Over 70 % to below 80 %
Over 80 %
3. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Setting the black line cleaning indication
U326
Description
Sets whether to display the cleaning guidance when detecting the black line.
Purpose
Displays the cleaning guidance in order to make the call for service with the black line decrease by the rubbish
on the contact glass when scanning from the DP.
Setting
1. Press the start key.
2. Select ON or OFF.
Display
ON
OFF
Initial setting: ON
Setting count value is displayed only if the setting is ON.
3. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Description
By proactively detecting the print coverage for the first page, the printing speed is auto-
matically adjusted so that an optimal print coverage is obtained from the second and
onward.
Does not automatically adjust the distance between pages, regardless of print density.
25/20 ppm model
Delayed
time
0 ms
500 ms
1000 ms
2000 ms
3000 ms
4000 ms
6000 ms
Description
Displays the cleaning guidance
Not to display the cleaning guidance
Description
32/25 ppm model
Print Delayed Print
speed time speed
20 ppm 0 ms 25 ppm
17.1 ppm 500 ms 20.7 ppm 1000 ms
15 ppm 1600 ms 15 ppm
12 ppm 2300 ms 12.8 ppm 2800 ms
10 ppm 3000 ms 11.1 ppm 3500 ms
8.6 ppm 4000 ms 9.4 ppm
6.7 ppm 6500 ms 6.7 ppm
2FZ/2F0/2HC-3
32/32 ppm model
Delayed Print
time speed
400 ms 26.4 ppm
20.9 ppm
2100 ms 15.1 ppm
12.8 ppm
11.2 ppm
4500 ms 9.4 ppm
7000 ms 6.8 ppm
1-3-69