2FZ/2F0/2HC
(3) Detaching and refitting the ISU (reference)
Follow the procedure below to replace the ISU.
Fitting requires the following tools
Two positions pins (P/N 18568120)
Procedure
Detaching the ISU
1. Remove the contact glass (see page 1-5-9).
2. Remove seven screws and then remove the
ISU cover.
3. Remove three screws and two connectors,
and then remove the ISU.
4. Replace the ISU.
1-5-16
ISU cover
Figure 1-5-32
Connector
Connector
ISU
Figure 1-5-33