Kyocera KM-C2520 Service Manual page 154

2FZ/2F0/2HC
Service settings
Use to print a service status page for reference during
maintenance or service.
1. Press [Others].
2. Press [Service].
3. Press [Print Status Page].
4. Press [Printing].
5. The service status page begins.
Printer reset (reboot)
Reset the printer function only without switching off (O
position) the main power switch.
1. Press [Others].
2. Press [Printer Reset].
3. Press [Yes].
4. The printer board reboots.
Dump received data
Print a hexadecimal output of received data for program
or file debugging.
1. Press [Others].
2. Press [Print HEX-DUMP].
3. Press [Yes]. Processing is displayed, followed by
Page remaining.
4. Send data to this device while it is in this state.
5. The dump page is printed.
6. Press [GO].
1-3-114
(6) Scanner default settings
Original Density
Set the image quality for default settings mode.
1. Select [Original density] using the cursor up/down
keys and press [Change #].
2. Select [Text+Photo], [Photo], [Text] or [OCR].
Density adjustment (auto)
Adjusts the overall dark/light balance when density
adjustment is set to [Auto].
1. Select [Density Adjustment (Auto)] using the cursor
up/down keys and press [Change #].
2. Press [Lighter] or [Darker] to adjust the density.
Density adjustment. (manual)
Adjusts the overall dark/light balance when density
adjustment is set to [Manual].
1. Select [Density Adjust. (Manual)] using the cursor
up/down keys and press [Change #].
2. Press [Lighter] or [Darker] to adjust the density.
File type
Configure the file type for default settings mode.
1. Select [File Type] using the cursor up/down keys
and press [Change #].
2. Select the file type.
PDF/JPEG quality
Configure the image quality for [PDF] or [JPEG] file types
for default settings mode.
1. Select [PDF/JPEG Quality] using the cursor up/
down keys and press [Change #].
2. Press [Low] or [High] to adjust image quality.
High compression PDF quality
Configure the image quality for [HiComp. PDF Color] file
type for default settings mode.
1. Select [High Comp. PDF Quality] using the cursor
up/down keys and press [Change #].
2. Press the cursor left/right keys to adjust image
quality.
Color output type
Configure the color output type.
1. Select [Color Output Type] ([Colour Output Type])
using the cursor up/down keys and press [Change
#].
2. Select [RGB] or [sRGB].
Scan resolution
Set the scan resolution for default settings mode.
1. Select [Scan Resolution] ([Scanning Resolution])
using the cursor up/down keys and press [Change
#].
2. Select [200dpi], [300dpi], [400dpi] or [600dpi].