Kyocera KM-C2520 Service Manual page 61

Maintenance
item No.
3. Press the interrupt key.
U066
4. Place an original and press the start key to make a test copy.
5. Change the setting value using the cursor up/down keys.
For copy example 1, increase the value. For copy example 2, decrease the value.
6. Press the start key. The value is set.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following adjustments in
maintenance mode.
U066
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Adjusting the scanner center line
U067
Description
Adjusts the scanner center line of the original scanning.
Purpose
Make the adjustment if there is a regular error between the center lines of the copy image and original.
Adjustment
1. Press the start key.
2. Select the item.
Display
ADJUST DATA
ADJUST DATA2
3. Press the interrupt key.
4. Place an original and press the start key to make a test copy.
5. Change the setting value using the cursor up/down keys.
For copy example 1, increase the value. For copy example 2, decrease the value.
6. Press the start key. The value is set.
Scanner leading edge registration
Original
U403 U071
(P.1-3-72) (P.1-3-24)
Description
Scanner center line
Scanner center line (second)
Scanner center line
Original
Description
Copy Copy
example 1 example 2
Figure 1-3-7
U404
(P.1-3-73)
Setting
range
-70 to 70
-40 to 40
Copy Copy
example 1 example 2
Figure 1-3-8
2FZ/2F0/2HC-5
Initial Change in
setting value per step
0 0.08 mm
0 0.08 mm
1-3-21