Kyocera KM-C2520 Service Manual page 146

2FZ/2F0/2HC
(4) Machine default
Enabling auto cassette switching
Use auto cassette switching to automatically switch the
paper source to another cassette loaded with the same
size and orientation paper when the current cassette runs
out of paper.
1. Select [Auto cassette switching] using the cursor
up/down keys and press [Change #].
2. Under [Function], select [Off] or [On].
3. Under [Paper Type], select [All types of paper] or
[Feed same paper type].
Specifying the paper size
Specify the paper sizes for Cassettes 1 - 4.
[3rd cassette] and [4th cassette] are shown when the
optional paper feeder is installed.
1. Select [Paper size (1st cassette - 4th cassette)]
using the cursor up/down keys and press [Change
#].
2. Select [Auto Detection] or [Standard sizes].
If [Auto Detection] is selected, choose the unit type.
If [Standard sizes] is selected, choose the paper
type.
Specifying the paper type
Specify the paper type for Cassettes 1 - 4.
3rd cassette and 4th cassette are shown when the
optional paper feeder or 3000 sheet paper feeder have
been installed.
1. Select [Paper type (1st cassette - 4th cassette)]
using the cursor up/down keys and press [Change
#].
2. Select the paper type.
Plain/Vellum/Rough/Recycled/Preprinted/Bond/
Color (Colour)/Prepunched/Letterhead/High Qual-
ity/Custom 1 - 8
Registering MP tray paper size
Up to 4 custom paper sizes can be pre-registered for use
with the MP tray.
1. Select [Store Paper Size for MPT] using the cursor
up/down keys and press [Change #].
2. Select the number to register from [Paper size
(User reg. 1 - 4)] using the cursor up/down keys
and press [Change #].
3. Press [On].
Press [+] or [-] to set the [Height].
Setting range
Inch models: 3
7/8
Metric models: 98 - 297 mm (1 mm increments)
Metric models only
Enter the size directly using the numeric keys by
pressing [#-Keys].
4. Press [+] or [-] to set the [Width].
Setting range
Inch models: 5
7/8
Metric models: 148 - 432 mm (1 mm increments)
Metric models only
Enter the size directly using the numeric keys by
pressing [#-Keys].
1-3-106
- 11 " (1/8" increments)
5/8
- 17" (1/8" increments)
5. To specify a paper type, press [Select Paper Type].
Select the paper type and press [Close].
Plain/Transparency/Rough/Vellum/Labels/Recy-
cled/Preprinted/Bond/Cardstock/Color (Colour)/
Prepunched/Letterhead/Thick paper/Envelope/
Coated/High Quality/Custom 1 - 8
6. Press [Close].
Enabling quick access to MP tray settings
Set whether to show the [MP tray Settings] screen when
the MP tray is selected from the [Basic] screen.
1. Select [Check MP tray sizing] using the cursor up/
down keys and press [Change #].
2. Select [Off] or [On].
Setting paper type properties (paper weight)
Set the weight (paper thickness) for each type of paper.
1. Select [Paper Type (paper weight)] using the cursor
up/down keys and press [Change #].
2. Select the paper type to set the weight using the
cursor up/down keys and press [Change #]
3. Select the weight and press [Close].
Light (Thin) - 64 g/m
m to 75 g/m or less/Normal 2 - from 76 g/m
2 2
90 g/m or less/Normal 3 - from 91 g/m
2
or less/Heavy 1 - from 106 g/m
Heavy 2 - from 136 g/m
Heavy 3 - 171 g/m
2
transparencies
4. Press [Close].
Setting paper type properties (duplex mode)
Specify whether to allow duplex printing for each of cus-
tom paper types 1 - 8.
1. Select [Select paper type (2 sided)] using the cur-
sor up/down keys and press [Change #].
2. Select the paper type to adjust from [Custom 1] -
[Custom 8] using the cursor up/down keys and
press [Change #].
3. Select [Off] or [On] and press [Close]
Setting handling for special paper types
When printing on prepunched, preprinted, or letterhead
paper, use this setting to change the direction of the fin-
ished output.
1. Select [Special paper action mode] ([Specif. paper
action mode]) using the cursor up/down keys and
press [Change #].
2. Select [Adj. Print Direction] or [Speed Priority].
or less/Normal 1 - from 60 g/
2
to 105 g/m
2
to 135 g/m or less/
2 2
to 170 g/m or less/
2 2
or more/Extra Heavy - OHP
to
2
2