Water Hose Inspection - Suzuki GSX-R600 Manual

4) Disconnect the radiator outlet hose (3) and water
bypass hose (4).
5) Disconnect the radiator inlet hose (5) and oil cooler
water inlet hose (6).
5
6) Disconnect the cooling fan motor coupler (7).
7) Remove the radiator assembly by removing the
bolts.
7
4
3
I837H1160007-01
6
I837H1160008-01
I837H1160009-01
I837H1160010-01
Engine Cooling System:
8) Remove the cooling fan motor (8) from the radiator.
8
Installation
Install the radiator in the reverse order of removal. Pay
attention to the following points:
• Connect the radiator hoses securely. Refer to "Water
Hose Routing Diagram (Page 1F-3)".
• Pour engine coolant. Refer to "Cooling System
Inspection in Section 0B (Page 0B-12)".
• Bleed air from the cooling circuit. Refer to "Cooling
System Inspection in Section 0B (Page 0B-12)".

Water Hose Inspection

Inspect the water hoses in the following procedures:
1) Remove the under cowlings. Refer to "Exterior Parts
Removal and Installation in Section 9D (Page 9D-
11)".
2) Check the water hoses for crack, damage or engine
coolant leakage. If any defect is found, replace the
water hose with a new one.
1F-6
I837H1160011-02
B837H11606005