Hp Flexible Smart Array Controller - HP ProLiant DL380 Gen9 Maintenance And Service Manual

Disconnect the cable, and then remove the HP Smart Storage Battery.
7.
To replace the component, reverse the removal procedure.

HP Flexible Smart Array Controller

CAUTION:
a controller or adapter installation or removal.
To remove the component:
Power down the server (on page 26).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 27).
o
Remove the server from the rack (on page 27).
o
Remove the access panel
4.
Remove the air baffle
5.
Disconnect the SAS cables.
6.
HP recommends performing a complete backup of all server data before performing
("Access panel" on page 31).
("Air baffle" on page 32).
Removal and replacement procedures 65