To replace the component:
Install the mezzanine card. Press down on the connector to seat the card.
1.
Install the access panel
2.
Install the server blade.
3.
HP Smart Array E200i Controller cache module
To remove the component:
Power down the server blade (on page 22).
1.
Remove the server blade (on page 22).
2.
Remove the access panel
3.
Remove all hard drives
4.
Remove all hard drive blanks
5.
Remove the hard drive backplane
6.
("Access
panel" on page 23).
("Access
panel" on page 23).
("Hard
drive" on page 24).
("Hard drive
blank" on page 23).
("Hard drive
backplane" on page 26).
Removal and replacement procedures 29