TROUBLESHOOTING
Installation
Checklist
Technical Tips
Component
PTZ style camera
VCR
PowerMic
4-26
If you are having problems getting equipment to work, be sure that
all of the necessary components have been installed. Refer to the
table below and see the documentation that came with each
component if you have any questions.
Table 4-8: Installation Checklist
Component
WorldCart
Main camera
Keypad
Look-At-Me-Button
Microphone
Optional Equipment
Modem
Software
The following table offers you some quick technical tips that may
save you time when troubleshooting a problem.
Table 4-9: Technical Tips
Unlike the PowerCam 100, the PTZ style camera
cannot be controlled from the LAMB.
You should use a line-level input VCR with the
Concorde¥4500.
You can daisy chain a maximum of four PowerMic
microphones Ñ for example, one main PowerMic
with three daisy chained to it.
For more information, see...
Installing the WorldCart
Installing the PowerCam 100
Installing the Keypad
Installing the Look-At-Me-Button
Installing the PowerMic
Document that comes with each
piece of equipment
The Concorde¥4500 Modem Card
Installing the Software Cartridge
Tip