Configuring A Hybrid-Port-Based Vlan - H3C S3100 Series Operation Manual

To do...
Enter system view
Enter VLAN view
Add an Access port to the
current VLAN
Follow these steps to configure the Access-port-based VLAN in Ethernet port view:
To do...
Enter system view
Enter Ethernet port view
Configure the port link type as
Access
Add the current Access port to a
specified VLAN
To add an Access port to a VLAN, make sure the VLAN already exists.

Configuring a Hybrid-Port-Based VLAN

A Hybrid port may belong to multiple VLANs, and this configuration can only be performed in Ethernet
port view.
Follow these steps to configure the Hybrid-port-based VLAN:
To do...
Enter system view
Enter Ethernet port view
Configure the port link type as
Hybrid
Allow the specified VLANs to pass
through the current Hybrid port
Configure the default VLAN of the
Hybrid port
Use the command...
system-view
vlan vlan-id
port interface-list
Use the command...
system-view
interface interface-type
interface-number
port link-type access
port access vlan vlan-id
Use the command...
system-view
interface interface-type
interface-number
port link-type hybrid
port hybrid vlan vlan-id-list
{ tagged | untagged }
port hybrid pvid vlan vlan-id
2-4
Remarks
—
Required
If the specified VLAN does not exist, this
command be created first creates the VLAN
before entering its view.
Required
By default, system will add all ports to VLAN 1.
—
—
Optional
The link type of a port is Access by
default.
Optional
By default, all Access ports belong
to VLAN 1.
—
—
Required
Required
By default, all Hybrid ports only
allow packets of VLAN 1 to pass.
Optional
VLAN 1 is the default by default
Remarks
Remarks