Radius Configuration Task List - H3C S3100 Series Operation Manual

You can use the display connection command to view the connections of Telnet users, but you cannot
use the cut connection command to cut down their connections.

RADIUS Configuration Task List

H3C's Ethernet switches can function not only as RADIUS clients but also as local RADIUS servers.
Table 2-9 RADIUS configuration tasks (the switch functions as a RADIUS client)
Configuring the
RADIUS client
Configuring the
RADIUS server
Table 2-10 RADIUS configuration tasks (the switch functions as a local RADIUS server)
Configuring the
RADIUS server
Task
Creating a RADIUS Scheme
Configuring RADIUS Authentication/Authorization Servers
Configuring Ignorance of Assigned RADIUS Authorization Attributes
Configuring the Sending Mode of Accounting Start Requests
Configuring RADIUS Accounting Servers
Configuring Shared Keys for RADIUS Messages
Configuring the Maximum Number of RADIUS Request
Transmission Attempts
Configuring the Type of RADIUS Servers to be Supported
Configuring the Status of RADIUS Servers
Configuring the Attributes of Data to be Sent to RADIUS Servers
Configuring the Local RADIUS Authentication Server Function
Configuring Timers for RADIUS Servers
Enabling Sending Trap Message when a RADIUS Server Goes
Down
Enabling the User Re-Authentication at Restart Function
Refer to the configuration of the RADIUS Server.
Task
Creating a RADIUS Scheme
Configuring RADIUS Authentication/Authorization Servers
Configuring RADIUS Accounting Servers
Configuring Shared Keys for RADIUS Messages
Configuring the Maximum Number of RADIUS Request
Transmission Attempts
2-11
Remarks
Required
Required
Optional
Optional
Required
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
—
Remarks
Required
Required
Required
Optional
Optional