Configuring The Cluster Synchronization Function - H3C S3100 Series Operation Manual

Operation
Display the topology of the
current cluster
Display the information about
the base topology of the cluster
Display the information about
all the devices in the base
cluster topology
When you display the cluster topology information, the devices attached to the switch that is listed in the
backlist will not be displayed.
Configure cluster device blacklist
Follow these steps to configure the cluster device blacklist on a management device:
Operation
Enter system view
Enter cluster view
Add the MAC address of a
specified device to the cluster
blacklist
Delete the specified MAC
address from the cluster
blacklist
Delete a device from the cluster
add this device to the cluster
blacklist
Displays the information about
the devices in the cluster
blacklist

Configuring the Cluster Synchronization Function

After a cluster is established, to simplify the access and management to the cluster, you can
synchronize the SNMP configurations on the management device and the local user configurations to
the member devices of the cluster by configuring the cluster synchronization function.
Command
display cluster current-topology
[ mac-address mac-address1
[ to-mac-address mac-address2 ] |
member-id member-id1
[ to-member-id member-id2 ] ]
display cluster base-topology
[ mac-address mac-address | member
member-id ]
display cluster base-members
Command
system-view
cluster
black-list add-mac
mac-address
black-list delete-mac
mac-address
delete-member member-id
[ to-black-list ]
display cluster black-list
2-18
Description
be executed in any
view.
Description
—
—
Optional
By default, the cluster blacklist
is empty.
Optional
Optional
Optional
This command can be
executed in any view.