Setting To Output System Information To The Snmp Nms; Displaying And Maintaining Information Center - H3C S3100 Series Operation Manual

Setting to Output System Information to the SNMP NMS

Table 1-15 Set to output system information to the SNMP NMS
Operation
Enter system view
Enable the information center
Enable information output to the
SNMP NMS
Configure the output rules of
system information
Set the format of time stamp in the
output information
To send information to a remote SNMP NMS properly, related configurations are required on both the
switch and the SNMP NMS.

Displaying and Maintaining Information Center

After the above configurations, you can execute the display commands in any view to display the
running status of the information center, and thus validate your configurations. You can also execute the
reset commands in user view to clear the information in the log buffer and trap buffer.
Table 1-16 Display and maintain information center
Operation
Display information on an
information channel
Display the operation status of
information center, the
configuration of information
channels, the format of time stamp
Display the status of log buffer and
the information recorded in the log
buffer
Display the summary information
recorded in the log buffer
Command
system-view
info-center enable
info-center snmp channel
{ channel-number | channel-name }
info-center source { modu-name |
default } channel
{ channel-number | channel-name }
[ { log | trap | debug } { level
severity | state state } ]*
info-center timestamp { log | trap
| debugging } { boot | date |
none }
Command
display channel [ channel-number |
channel-name ]
display info-center [ unit unit-id ]
display logbuffer [ unit unit-id ] [ level severity
| size buffersize ]* [ | { begin | exclude |
include } regular-expression ]
display logbuffer summary [ level severity ]
1-13
Description
—
Optional
Enabled by default.
Optional
By default, the switch outputs trap
information to SNMP through
channel 5.
Optional
Refer to Table 1-8 for the default
output rules of system information.
Optional
By default, the time stamp format
of the information output to the
SNMP NMS is date.
Description
Available in any view