Ssh Configuration Examples; When Switch Acts As Server For Local Password Authentication - H3C S3100 Series Operation Manual

Operation
Display information about
the peer RSA public keys
Generate a RSA key pair
Destroy a RSA key pair
Enter public key view
Import RSA public key from
public key file
Specify publickey
authentication as the
default authentication type
Specify on the client the
host public key of the
server to be connected
Assign a public key to an
SSH user
Create an SSH user and
specify pubblickey
authentication as its
authentication type
After the RSA key pair is generated, the display rsa local-key-pair public command displays two
public keys (the host public key and server public key) when the S3100-EI switch is working in
SSH1-compatible mode, but only one public key (the host public key) when the switch is working in
SSH2 mode.
The result of the display rsa local-key-pair public command or the public key converted with the
SSHKEY tool contains no information such as the authentication type, so they cannot be directly
used as parameters in the public-key peer command. For the same reason, neither can the result
of the display public-key local rsa public command be used in the rsa peer-public-key
command directly.

SSH Configuration Examples

When Switch Acts as Server for Local Password Authentication

Network requirements
As shown in Figure
(SSH Server) for secure data exchange. The host runs SSH2.0 client software. Password
authentication is required.
Original commands
display rsa peer-public-key
[ brief | name keyname ]
rsa local-key-pair create
rsa local-key-pair destroy
rsa peer-public-key keyname
rsa peer-public-key keyname
import sshkey filename
ssh authentication-type default
rsa
ssh client { server-ip |
server-name } assign rsa-key
keyname
ssh user username assign
rsa-key keyname
ssh user username
authentication-type rsa
1-10, establish an SSH connection between the host (SSH Client) and the switch
display public-key peer [ brief |
name pubkey-name ]
public-key local create rsa
public-key local destroy rsa
public-key peer keyname
public-key peer keyname
import sshkey filename
ssh authentication-type
default publickey
ssh client { server-ip |
server-name } assign publickey
keyname
ssh user username assign
publickey keyname
ssh user username
authentication-type publickey
1-21
Current commands