H3C S3100 Series Operation Manual page 883

To do...
Configure the retaining time of
statistics information
Configure test start time and
lifetime
Enable routing table bypass
Configure the TTL
Configure the automatic test
interval
Configure the probe timeout time
Configure the type of service
Start the test
Display test results
7) Configuring TCP test on HWPing client
Follow these steps to configure TCP test on HWPing client:
To do...
Enter system view
Enable the HWPing client
function
Create an HWPing test
group and enter its view
Configure the test type
Configure the destination
address
Use the command...
statistics keep-time keep-time
test-time begin { hh:mm :ss
[ yyyy/mm/dd ] | now } lifetime
lifetime
sendpacket passroute
ttl number
frequency interval
timeout time
tos value
test-enable
display hwping results
[ admin-name operation-tag ]
Use the command...
system-view
hwping-agent enable
hwping administrator-name
operation- tag
test-type { tcpprivate |
tcppublic }
destination-ip ip-address
1-14
Remarks
Optional
By default, the retaining time of
statistics information is 120
minutes.
Optional
By default, no test start time and
lifetime is configured.
Optional
By default, routing table bypass is
disabled.
Optional
By default, TTL is 20.
The sendpacket passroute
command voids the ttl command.
Optional
By default, the automatic test
interval is zero seconds, indicating
no automatic test will be made.
Optional
By default, a probe times out in
three seconds.
Optional
By default, the service type is zero.
Required
Required
You can execute the command in
any view.
Remarks
—
Required
By default, the HWPing client function is
disabled.
Required
By default, no test group is configured.
Required
By default, the test type is ICMP.
Required
This IP address and the one configured on
the HWPing server for listening services
must be the same.
By default, no destination address is
configured.