Configuring Guest Vlan; Configuring Auth-Fail Vlan For 802.1X Authentication - H3C S3100 Series Operation Manual

Configuring Guest VLAN

Table 1-8 Configure a guest VLAN
Operation
Enter system view
In system
view
Enable
the Guest
VLAN
In port
function
view
This function is not supported on the S3100-C-EPON-EI Series Ethernet Switches.

Configuring Auth-Fail VLAN for 802.1X Authentication

Configuration prerequisites
Enable 802.1X authentication.
Create the VLAN to be specified as the Auth-Fail VLAN.
Configuration procedure
Table 1-9 Configure an Auth-Fail VLAN for 802.1X authentication
Operation
Enter system view
In Ethernet interface view
Configure the Auth-Fail VLAN
for 802.1X authentication
Command
system-view
dot1x guest-vlan vlan-id
[ interface interface-list ]
interface interface-type
interface-number
dot1x guest-vlan vlan-id
quit
Command
system-view
interface interface-type
interface-number
dot1x auth-fail vlan
authfail-vlan-id
1-21
Remarks
—
Required
By default, the guest VLAN function
is disabled.
Remarks
—
—
Required
By default, a port is configured
with no Auth-Fail VLAN for
802.1X authentication.