H3C S3100 Series Operation Manual page 878

To do...
Configure the probe
timeout time
Configure the type of
service
Configure the type of FTP
operation
Configure an FTP login
username
Configure an FTP login
password
Configure a file name for
the FTP operation
Configure size of a file to
be uploaded in an FTP
test
Start the test
Display test results
4) Configuring HTTP test on HWPing client
Follow these steps to configure HTTP test on HWPing client:
To do...
Enter system view
Enable the HWPing client function
Create an HWPing test group and
enter its view
Configure the test type
Configure the destination IP
address
Configure dns-server
Use the command...
timeout time
tos value
ftp-operation { get | put }
username name
password password
filename file-name
filesize file-size
test-enable
display hwping results
[ admin-name operation-tag ]
Use the command...
system-view
hwping-agent enable
hwping administrator-name
operation-tag
test-type http
destination-ip ip-address
dns-server ip-address
1-9
Remarks
Optional
By default, a probe times out in three
seconds.
Optional
By default, the service type is zero.
Optional
By default, the type of FTP operation is get,
that is, the FTP operation will get a file from
the FTP server.
Required
By default, neither username nor password
is configured.
Required
By default, no file name is configured for the
FTP operation
Required
By default, the file is 1 MB.
Required
Required
You can execute the command in any view.
Remarks
—
Required
By default, the HWPing client function
is disabled.
Required
By default, no test group is
configured.
Required
By default, the test type is ICMP.
Required
When you use H3C S3100 Series
Switches as HWPing Client for http
test, the destination address can be
host name or IP address.
By default, no destination address is
configured.
Required: When you use H3C S3100
Series Switches as HWPing Client for
http test and set the destination
address as host name.
By default, no IP address of the DNS
server is configured.