Configuring The Timers Regarding Tacacs Servers; Displaying And Maintaining Aaa - H3C S3100 Series Operation Manual

Configuring the Timers Regarding TACACS Servers

Table 2-31 Configure the timers regarding TACACS servers
Operation
Enter system view
Create an HWTACACS
scheme and enter its view
Set the response timeout time
of TACACS servers
Set the time that the switch
must wait before it can restore
the status of the primary server
to active
Set the real-time accounting
interval
To control the interval at which users are charge in real time, you can set the real-time accounting
interval. After the setting, the switch periodically sends online users' accounting information to the
TACACS server at the set interval.
The real-time accounting interval must be a multiple of 3.
The setting of real-time accounting interval somewhat depends on the performance of the
TACACS client and server devices: A shorter interval requires higher device performance.

Displaying and Maintaining AAA

After the above configurations, you can execute the display commands in any view to view the
configuration result and operation status of AAA, RADIUS and HWTACACS and verify your
configuration.
You can use the reset command in user view to clear the corresponding statistics.
Table 2-32 Display AAA information
Operation
Display configuration
information about one specific
or all ISP domains
Command
system-view
hwtacacs scheme
hwtacacs-scheme-name
timer response-timeout
seconds
timer quiet minutes
timer realtime-accounting
minutes
Command
display domain [ isp-name ]
2-29
Remarks
—
Required
By default, no HWTACACS
scheme exists.
Optional
By default, the response
timeout time is five seconds.
Optional
By default, the switch must wait
five minutes before it can
restore the status of the primary
server to active.
Optional
By default, the real-time
accounting interval is 12
minutes.
Remarks
You can
execute the
display