Dhcp Client Configuration Example; Displaying Dhcp/Bootp Client Configuration - H3C S3100 Series Operation Manual

DHCP Client Configuration Example

Network requirements
Using DHCP, VLAN-interface 1 of Switch A is connected to the LAN to obtain an IP address from the
DHCP server.
Network diagram
Figure 5-2 A DHCP network
Configuration procedure
The following describes only the configuration on Switch A serving as a DHCP client.
# Configure VLAN-interface 1 to dynamically obtain an IP address by using DHCP.
<SwitchA> system-view
[SwitchA] interface Vlan-interface 1
[SwitchA-Vlan-interface1] ip address dhcp-alloc

Displaying DHCP/BOOTP Client Configuration

Follow these steps to displaying DHCP/BOOTP Client:
Operation
Display related information on a
DHCP client
Display related information on a
BOOTP client
Command
display dhcp client [ verbose ]
display bootp client [ interface
Vlan-interface vlan-id ]
5-5
Description
Optional
Available in any
view