H3C S3100 Series Operation Manual page 876

To do...
Create an HWPing test
group and enter its view
Configure the test type
Configure the source
interface
Configure the number of
probes per test
Configure a test
description
Configure the maximum
number of history records
that can be saved
Enable history record
Configure the retaining
time of history record
Configure statistics
interval and the maximum
number of retained
statistics information
Configure the retaining
time of statistics
information
Configure test start time
and lifetime
Enable routing table
bypass
Set the maximum number
of concurrent tests
Configure the probe
timeout time
Start the test
Display test results
3) Configuring FTP test on HWPing client
Follow these steps to configure FTP test on HWPing client:
To do...
Enter system view
Use the command...
hwping administrator-name
operation-tag
test-type dhcp
source-interface interface-type
interface-number
count times
description string
history-records number
history-record enable
history keep-time keep-time
statistics { interval interval |
max-group number }
statistics keep-time keep-time
test-time begin { hh:mm :ss
[ yyyy/mm/dd ] | now } lifetime
lifetime
sendpacket passroute
hwping-agent max-requests
number
timeout time
test-enable
display hwping results
[ admin-name operation-tag ]
Use the command...
system-view
1-7
Remarks
Required
By default, no test group is configured.
Required
By default, the test type is ICMP.
Required
You can only configure a VLAN interface as
the source interface.
By default, no source interface is configured.
Optional
By default, each test makes one probe.
Optional
By default, no description information is
configured.
Optional
By default, the maximum number is 50.
Optional
By default, history record is not enabled.
Optional
By default, the retaining time of history record
is 120 minutes.
Optional
By default, statistics interval is 120 minutes
and up to two pieces of statistics information
can be retained.
Optional
By default, the retaining time of statistics
information is 120 minutes.
Optional
By default, no test start time and lifetime is
configured.
Optional
By default, routing table bypass is disabled.
Optional
By default, five concurrent tests are allowed.
Optional
By default, a probe times out in three
seconds.
Required
Required
You can execute the command in any view.
Remarks
—