H3C S3100 Series Operation Manual page 874

To do...
Enter system view
Enable the HWPing client function
Create an HWPing test group and
enter its view
Configure the test type
Configure the destination IP
address
Configure the source interface
Configure the source IP address
Configure the number of probes
per test
Configure the packet size
Configure a stuffing character
string
Configure a test description
Configure the maximum number of
history records that can be saved
Enable history record
Configure the retaining time of
history record
Configure statistics interval and the
maximum number of retained
statistics information
Use the command...
system-view
hwping-agent enable
hwping administrator-name
operation-tag
test-type icmp
destination-ip ip-address
source-interface interface-type
interface-number
source-ip ip-address
count times
datasize size
datafill string
description string
history-records number
history-record enable
history keep-time keep-time
statistics { interval interval |
max-group number }
1-5
Remarks
—
Required
By default, the HWPing client
function is disabled.
Required
By default, no test group is
configured.
Optional
By default, the test type is ICMP.
Required
By default, no destination address
is configured.
Optional
For ICMP tests, use the
source-interface command to
specify a source interface for
sending ICMP requests.
By default, no source interface is
configured.
Optional
By default, no source IP address is
configured.
Optional
By default, each test makes one
probe.
Optional
By default, the packet size is 56
bytes.
Optional
By default, the numbers between 0
and 255 are stuffed into datagrams
in a cyclically way.
Optional
By default, no description
information is configured.
Optional
By default, the maximum number is
50.
Optional
By default, history record is not
enabled.
Optional
By default, the retaining time of
history record is 120 minutes.
Optional
By default, statistics interval is 120
minutes and up to two pieces of
statistics information can be
retained.