Cluster Configuration Example; Basic Cluster Configuration Example - H3C S3100 Series Operation Manual

Clear the statistics on NDP ports
When you display the cluster topology information, the devices attached to the switch that is listed in the
backlist will not be displayed.

Cluster Configuration Example

Basic Cluster Configuration Example

Network requirements
Three switches compose a cluster, where:
An S3100 series switch serves as the management device.
The rest are member devices.
Serving as the management device, the S3100 switch manages the two member devices. The
configuration for the cluster is as follows:
The two member devices connect to the management device through Ethernet 1/0/2 and Ethernet
1/0/3.
The management device connects to the Internet through Ethernet 1/0/1.
Ethernet 1/0/1 belongs to VLAN 2, whose interface IP address is 163.172.55.1.
All the devices in the cluster share the same FTP server and TFTP server.
The FTP server and TFTP server use the same IP address: 63.172.55.1.
The NMS and logging host use the same IP address: 69.172.55.4.
Operation Command
reset ndp statistics [ interface
port-list ]
2-23
Description
You can execute
the reset command
in user view.