H3C S3100 Series Operation Manual page 38

Operation
Configure not to authenticate users
Set the baud rate
Set the check mode
Configure
the Console
port
Set the stop bits
Set the data bits
Configure the command
available to users logging into the
user interface
Enable terminal services
Set the maximum number of lines
the screen can contain
Set the history command buffer size
Set the timeout time for the user
interface
Command
authentication-mode none
speed speed-value
parity { even | none | odd }
stopbits { 1 | 1.5 | 2 }
databits { 7 | 8 }
level
user privilege level level
shell
screen-length screen-length
history-command max-size
value
idle-timeout
[ seconds ]
2-6
Description
Required
By default, users logging in through the
Console port (AUX user interface) are
not authenticated.
Optional
The default baud rate of a Console port
is 9,600 bps.
Optional
By default, the check mode of a
Console port is none, that is, no check
is performed.
Optional
The stop bits of a Console port is 1.
Optional
The default data bits of a Console port
is 8.
Optional
By default, commands of level 3 are
available to users logging into the AUX
user interface, and commands of level
0 are available to users logging into the
VTY user interface.
Optional
By default, terminal services are
available in all user interfaces.
Optional
By default, the screen can contain up to
24 lines.
You can use the screen-length 0
command to disable the function to
display information in pages.
Optional
The default history command buffer
size is 10. That is, a history command
buffer can store up to 10 commands by
default.
Optional
The default timeout time of a user
interface is 10 minutes.
With the timeout time being 10
minutes, the connection to a user
minutes
interface is terminated if no operation is
performed in the user interface within
10 minutes.
You can use the idle-timeout 0
command to disable the timeout
function.