H3C S3100 Series Operation Manual page 680

Table 1-3 Configure basic SNMP functions (SNMPv3)
Operation
Enter system view
Enable SNMP agent
Set system information
and specify to enable
SNMPv3 on the switch
Set an SNMP group
Encrypt a plain-text
password to generate a
cipher-text one
Add a user to an SNMP
group
Set the maximum size of
an SNMP packet for
SNMP agent to receive
or send
Set the device engine ID
Create or update the
view information
Command
system-view
snmp-agent
snmp-agent sys-info { contact
sys-contact | location
sys-location | version { { v1 |
v2c | v3 }* | all } }
snmp-agent group v3
group-name [ authentication |
privacy ] [ read-view
read-view ] [ write-view
write-view ] [ notify-view
notify-view ] [ acl acl-number ]
snmp-agent
calculate-password
plain-password mode { md5 |
sha } { local-engineid |
specified-engineid engineid }
snmp-agent usm-user v3
user-name group-name
[ cipher ] authentication-mode
{ md5 | sha } auth-password
[ privacy-mode { des56 |
aes128 } priv-password ] ] [ acl
acl-number ]
snmp-agent packet max-size
byte-count
snmp-agent local-engineid
engineid
snmp-agent mib-view
{ included | excluded }
view-name oid-tree [ mask
mask-value ]
1-4
Description
—
Optional
Disabled by default.
You can enable SNMP agent by
executing this command or any of the
commands used to configure SNMP
agent.
Required
By default, the contact information for
system maintenance is "R&D
Hangzhou, H3C Technology Co.,
Ltd.", the system location is
"Hangzhou China", and the SNMP
version is SNMPv3.
Required
Optional
This command is used if password in
cipher-text is needed for adding a
new user.
Required
Optional
1,500 bytes by default.
Optional
By default, the device engine ID is
"enterprise number + device
information".
Optional
By default, the view name is
"ViewDefault" and OID is 1.