H3C S3100 Series Operation Manual page 888

To do...
Configure the IP address of the
DNS server
Start the test
Display test results
10) Clear all agents on the HWPing client
Follow these steps to clear all agents on the HWPing client:
To do...
Enter system view
Clear all agents on the HWPing
client
This command clears all the configured agents, including the test configuration, test result, and
history information.
The result cannot be restored after the execution of the command.
The command does not disable HWPing-agent.
Configuring HWPing client to send Trap messages
Trap messages are generated regardless of whether the HWPing test succeeds or fails. You can
specify whether to output Trap messages by enabling/disabling Trap sending.
Follow these steps to configure the HWPing client to send Trap messages:
To do...
Enter system view
Enable the HWPing client function
Create an HWPing test group and
enter its view
Enable the HWPing client to send
Trap messages
Configure the number of
consecutive unsuccessful HWPing
tests before Trap output
Configure the number of
consecutive unsuccessful HWPing
probes before Trap output
Use the command...
dns-server ip-address
test-enable
display hwping results
[ admin-name operation-tag ]
Use the command...
system-view
hwping-agent clear
Use the command...
system-view
hwping-agent enable
hwping administrator-name
operation- tag
send-trap { all | { probefailure |
testcomplete | testfailure }* }
test-failtimes times
probe-failtimes times
1-19
Remarks
Required
By default, no DNS server address
is configured.
Required
Required
The display command can be
executed in any view.
Remarks
—
Required
Remarks
—
Required
By default, the HWPing client
function is disabled.
Required
By default, no test group is
configured.
Required
By default, Trap sending is
disabled.
Optional
By default, Trap messages are
sent each time a test fails.
Optional
By default, Trap messages are
sent each time a probe fails.