H3C S3100 Series Operation Manual page 458

Operation
Set the user name in
fixed mode for MAC
authentication
Specify an ISP
domain for MAC
authentication
Configure the MAC
authentication timers
Enter Ethernet
interface view
Set the offline detect
timer for MAC
authentication on the
Ethernet port view
If MAC authentication is enabled on a port, you cannot configure the maximum number of dynamic
MAC address entries for that port (through the mac-address max-mac-count command), and
vice versa.
If MAC authentication is enabled on a port, you cannot configure port security (through the
port-security enable command) on that port, and vice versa.
You can configure MAC authentication on a port before enabling it globally. However, the
configuration will not take effect unless MAC authentication is enabled globally.
The offline detect timer configured in system view applies to all MAC authentication-enabled ports.
The offline detect timer configured in Ethernet port view applies to the current port only. You can
set the offline detect timer to different values on different Ethernet ports.
The offline detect timer configured in Ethernet port view takes precedence over the one configured
in system view.
Command
Set the user
name in fixed mac-authentication
mode for MAC authmode usernamefixed
authentication
Configure the mac-authentication
user name authusername username
Configure the
mac-authentication
password authpassword password
mac-authentication domain isp-name
mac-authentication timer { offline-detect
offline-detect-value | quiet quiet-value |
server-timeout server-timeout-value }
interface interface-type interface-number
mac-authentication timer offline-detect
offline-detect-value
1-3
Remarks
Optional
By default, the user name
is "mac" and no password
is configured.
Required
By default, no ISP domain
is specified and the default
domain is used.
Optional
The default timeout values
are as follows:
300 seconds for offline
detect timer;
60 seconds for quiet timer;
and
100 seconds for server
timeout timer
—
Optional
300 seconds for offline
detect timer by default