Common Multicast Configuration; Configuring Suppression On The Multicast Source Port - H3C S3100 Series Operation Manual

6

Common Multicast Configuration

Common Multicast Configuration
Table 6-1 Common multicast configuration tasks

Configuring Suppression on the Multicast Source Port

Configuring a Multicast MAC Address Entry
Configuring Dropping Unknown Multicast Packets
Configuring Suppression on the Multicast Source Port
Only the S3100-EI series support multicast source port suppression.
Some users may deploy unauthorized multicast servers on the network. This affects the use of network
bandwidth and transmission of multicast data of authorized users by taking network resources. You can
configure multicast source port suppression on certain ports to prevent unauthorized multicast servers
attached to these ports from sending multicast traffic to the network.
Configuring multicast source port suppression in system view
Table 6-2 Configure multicast source port suppression in system view
Operation
Enter system view
Configure multicast source port
suppression
Configuration task
Command
system-view
multicast-source-deny
[ interface interface-list ]
6-1
Remarks
Optional
Optional
Optional
Remarks
—
Optional
Multicast source port suppression
is disabled by default.