Configuration Tasks
Table 1-1 Smart Link configuration tasks
Configuring a Smart Link
Device
Configuring Associated
Devices
Configuring a Smart Link Device
A Smart Link device refers to a device on which Smart Link is enabled and a Smart Link group is
configured, and that sends flush messages from the specified control VLAN. A member port of a Smart
Link group can be either an Ethernet port or a manually-configured or static LACP aggregation group.
You can configure a port or a link aggregation group as a member of a Smart Link group.
Table 1-2 Configure Smart Link (with ports as the members of the Smart Link group)
Operation
Enter system view
Create a Smart Link group
and enter Smart Link group
view
Enable the function of sending
flush messages in the
specified control VLAN
Configure a
port as a
Smart Link
group
member
Table 1-3 Configure Smart Link (with link aggregation groups are the members of the Smart Link
group)
Operation
Enter system view
Create a Smart Link group and
enter Smart Link group view
Create a Smart Link group
Add member ports to the Smart Link group
Enable the function of sending flush messages in the
specified control VLAN
Enable the function of processing flush messages
received from the specified control VLAN
system-view
smart-link group group-id
flush enable control-vlan
vlan-id
port interface-type
Smart Link
interface-number { master |
group view
slave }
quit
interface interface-type
Ethernet port
interface-number
view
port smart-link group group-id
{ master | slave }
system-view
smart-link group group-id
Task
Command
Command
1-4
Remarks
Required
Required
Remarks
—
Required
Required
By default, no control VLAN for
sending flush messages is
specified.
Required
Use either approach
Remarks
—
Required