H3C S3100 Series Operation Manual page 880

To do...
Configure the type of HTTP
operation
Configure the HTTP operation
string and HTTP version
Start the test
Display test results
5) Configuring jitter test on HWPing client
Follow these steps to configure jitter test on HWPing client:
To do...
Enter system view
Enable the HWPing client function
Create an HWPing test group and
enter its view
Configure the test type
Configure the destination IP
address
Configure the destination port
Configure the source IP address
Configure the source port
Configure the number of probes
per test
Configure the packet size
Use the command...
http-operation { get | post }
http-string string version
test-enable
display hwping results
[ admin-name operation-tag ]
Use the command...
system-view
hwping-agent enable
hwping administrator-name
operation-tag
test-type jitter [ codec
codec-value ]
destination-ip ip-address
destination-port
Port-number
source-ip ip-address
source-port port-number
count times
datasize size
1-11
Remarks
Optional
By default, the type of HTTP
operation is get, that is, the HTTP
operation will get data from the HTTP
server.
Optional
By default, no HTTP operation string
and HTTP version are configured.
Required
Required
You can execute the command in any
view.
Remarks
—
Required
By default, the HWPing client
function is disabled.
Required
By default, no test group is
configured.
Required
By default, the test type is ICMP.
Required
The destination address must be
the IP address of a UDP listening
service on the HWPing server.
By default, no destination address
is configured.
Required
The destination port must be the
port of a UDP listening service on
the HWPing server.
By default, no destination port is
configured.
Optional
By default, no source IP address is
configured.
Optional
By default, no source port is
configured.
Optional
By default, each test makes one
probe.
Optional
By default, the packet size is 68
bytes.