Displaying and Maintaining Voice VLAN
Display information about the ports on which voice VLAN
configuration fails
Display the voice VLAN configuration status
Display the OUI list
Display the ports operating in the voice VLAN
Voice VLAN Configuration Example
Voice VLAN Configuration Example (Automatic Voice VLAN Assignment Mode)
Network requirements
Create a voice VLAN and configure it to operate in automatic voice VLAN assignment mode to enable
the port to which an IP phone is connected to join or exit the voice VLAN automatically and voice traffic
to be transmitted within the voice VLAN.
Create VLAN 2 and configure it as the voice VLAN, with the aging timer being 100 minutes.
The IP phone sends tagged packets. It is connected to Ethernet 1/0/1, a hybrid port, with VLAN 6
being its default VLAN. Set this port to operate in automatic voice VLAN assignment mode.
You need to add a user-defined OUI address 0011-2200-000, with the mask being ffff-ff00-0000
and the description string being "test".
Network diagram
Figure 1-2 Network diagram for voice VLAN configuration (automatic voice VLAN assignment mode)
Device A
VLAN2
Eth1/0/1
VLAN2
010-1001
OUI:0011-2200-0000
Mask:ffff-ff00-0000
Configuration procedure
# Create VLAN 2 and VLAN 6.
<DeviceA> system-view
[DeviceA] vlan 2
[DeviceA-vlan2] quit
[DeviceA] vlan 6
[DeviceA-vlan6] quit
To do...
Device B
Internet
1-11
Use the command...
display voice vlan error-info
display voice vlan status
display voice vlan oui
display vlan vlan-id
Remarks
In any view