H3C S3100 Series Operation Manual page 887

To do...
Configure the source IP address
Configure the number of probes
per test
Configure a test description
Configure the maximum number of
history records that can be saved
Enable history record
Configure the retaining time of
history record
Configure statistics interval and the
maximum number of retained
statistics information
Configure the retaining time of
statistics information
Configure test start time and
lifetime
Enable routing table bypass
Configure the TTL
Configure the automatic test
interval
Configure the probe timeout time
Configure the type of service
Configure the domain name to be
resolved
Use the command...
source-ip ip-address
count times
description string
history-records number
history-record enable
history keep-time keep-time
statistics { interval interval |
max-group number }
statistics keep-time keep-time
test-time begin { hh:mm :ss
[ yyyy/mm/dd ] | now } lifetime
lifetime
sendpacket passroute
ttl number
frequency interval
timeout time
tos value
dns resolve-targetdomai
domainname
1-18
Remarks
Optional
By default, no source IP address is
specified.
Optional
By default, one probe is made per
test.
Optional
By default, no description
information is configured.
Optional
By default, the maximum number is
50.
Optional
By default, history record is not
enabled.
Optional
By default, the retaining time of
history record is 120 minutes.
Optional
By default, statistics interval is 120
minutes and up to two pieces of
statistics information can be
retained.
Optional
By default, the retaining time of
statistics information is 120
minutes.
Optional
By default, no test start time and
lifetime is configured.
Optional
By default, routing table bypass is
disabled.
Optional
By default, TTL is 20.
The sendpacket passroute
command voids the ttl command.
Optional
By default, the automatic test
interval is zero seconds, indicating
no automatic test will be made.
Optional
By default, a probe times out in
three seconds.
Optional
By default, the service type is zero.
Required
By default, the domain name to be
resolved by DNS is not specified.