H3C S3100 Series Operation Manual page 832

Table 4-8 Commonly used pluggable transceivers
Transceiver type
SFP (Small Form-factor
Pluggable)
GBIC (GigaBit Interface
Converter)
XFP (10-Gigabit small
Form-factor Pluggable)
XENPAK (10 Gigabit
EtherNet Transceiver
Package)
For pluggable transceivers supported by S3100 series Ethernet switches, refer to H3C S3100 Series
Ethernet Switches Installation Manual.
Identifying pluggable transceivers
As pluggable transceivers are of various types and from different vendors, you can perform the
following configurations to identify main parameters of the pluggable transceivers, including transceiver
type, connector type, central wavelength of the laser sent, transfer distance and vendor name or vendor
name specified.
Table 4-9 Identify pluggable transceivers
Operation
Display main parameters of the
pluggable transceiver(s)
Display part of the electrical label
information of the anti-spoofing
transceiver(s) customized by H3C
You can use the Vendor Name field in the prompt information of the display transceiver
interface command to identify an anti-spoofing pluggable transceiver customized by H3C. If the
field is H3C, it is considered an H3C-customized pluggable transceiver.
Electrical label information is also called permanent configuration data or archive information,
which is written to the storage device of a card during device debugging or test. The information
includes name of the card, device serial number, and vendor name or vendor name specified.
Diagnosing pluggable transceivers
The system outputs alarm information for you to diagnose and troubleshoot faults of pluggable
transceivers. Optical transceivers customized by H3C also support the digital diagnosis function, which
enables a transceiver to monitor the main parameters such as temperature, voltage, laser bias current,
Applied environment
Generally used for
100M/1000M Ethernet
interfaces or POS
155M/622M/2.5G
interfaces
Generally used for
1000M Ethernet
interfaces
Generally used for 10G
Ethernet interfaces
Generally used for 10G
Ethernet interfaces
Command
display transceiver interface
[ interface-type interface-number ]
display transceiver manuinfo
interface [ interface-type
interface-number ]
4-4
Whether can be an
optical transceiver
Yes
Yes
Yes
Yes
Available for all pluggable
transceivers
Available for anti-spoofing
pluggable transceiver(s)
customized by H3C only
Whether can be an
electrical transceiver
Yes
Yes
No
Yes
Description