Recalling The Previous Copy Job (Recall) - Oce 3122 Manual

Recalling the Previous Copy Job
You can recall up to three previously set copy jobs, and make copies using the copy settings stored to
these copy jobs.
NOTICE
When you have pressed the
have recalled a copy setting from mode memory, the previous copy job is selected. Accordingly, when you have
not pressed either of the above keys after setting the copy job, it cannot be recalled by pressing the [REC.] key.
Once stored, the three copy jobs are held in memory even if the power is turned OFF.
The Standard mode or Additional Function settings are not stored.
For example, when the Photo mode is set to "ON" in the custom copy settings, the Photo mode cannot be recalled
using the Recall mode.
Place your originals.
For instructions on how to place an original on the platen glass, see p. 2-13.
For instructions on how to place originals in the ADF, see p. 2-14.
For instructions on how to place originals in the RDF, see p. 2-16.
1 Press the [REC.] key.
MEMO
For details on operations to carry out from placing the original
until the Special Features screen is displayed, see "Calling up
the Special Features Screen," on p. 4-3.
2 Select one of the [1BEFORE], [2BEFORE] or
[3BEFORE] keys. Check that the copy settings are
correct before pressing the [OK] key.
MEMO
You can also check which copy jobs are stored to memory other
than the currently displayed copy job by pressing the [ ] or [ ]
key.
Océ 3121 – Copying Manual – English
or keys after setting the copy quantity, exposure, copy ratio, etc., or when you
(RECALL)
1
2
3
4
5
6
7
8
9
10
6-11