Parts Replacement Procedure; Fixing/Feeding Assembly; Before Removing The Fixing/Feeding Unit; Removing The Fixing/Feeding Unit - Canon iR5055 Series Service Manual

9.5 Parts Replacement Procedure

9.5.1 Fixing/Feeding Assembly

9.5.1.1 Before Removing the Fixing/Feeding unit

iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N
1) Detach the duplexing feed front cover. (page 10-14)Reference[Remov-
ing the Duplexing Feed Front Cover]

9.5.1.2 Removing the Fixing/Feeding unit

iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N
1) While pushing the hook shaft [1] found at the rear of the fixing/feeding
unit in the direction of the arrow (toward the machine front), rotate the
fixing/feeding unit release lever clockwise to lock it in place [2].
[2]
2) While pushing the 2 stopper plates [1] of the rail assembly of the fixing/
feeding unit to the inside and slide out the fixing/feeding unit [2].
[1]
F-9-28
0015-8187
0015-5039
Follow the steps above when sliding out the fixing/feeding unit.
Follow the steps below when detaching the fixing/feeding unit from the ma-
chine.
3) Remove the fixing/feeding unit [2] from the rail.
- 2 screws [1]
[1]
[2]
[1]
F-9-29
Chapter 9
9-19