Call Hold; System Hold - Panasonic DBS576 Section 700 Technical Manual

Section 700 - Operation
• FF1-2: Dial Plan
• FF3-0: Extension COS Assignment
Considerations
• Calls cannot be forwarded to an extension that already has Call Forwarding or DND activated.
For example, extension 220 can only forward to extension 225 if 225 is not forwarded.
• Call Forwarding - Busy and Call Forwarding - No Answer can both be set at the same time.
• You can cancel both Call Forwarding and DND by entering 7 * *.
• An auto camp-on to a busy extension will forward to the Call Forward No Answer destination. A
manual camp-on to a busy extension will not forward.
• If Call Forwarding No Answer and DND are both set, calls immediately forward to the Call
Forward No Answer destination.

Call Hold

CPC-96, CPC-288, and CPC-576 All Versions
Description
The system provides the following types of Call Hold:
•

System Hold

• Floating Hold (Retrieve Only)
• Exclusive Hold
• Broker's Hold
• Call Park (Station)

System Hold

You can place either an outside or intercom call on System Hold. You can retrieve a call placed on
System Hold from any extension that has a line appearance for the held call.
Operation
To place a call on System Hold:
1. While on a call, hookflash.
To retrieve a call placed on System Hold:
1. If onhook, go offhook.
2. Hookflash.
576-20-700
Action
Action
DBS 576 (USA), issued January 1999
Chapter 7. SLT Features
Result
Intercom dial tone
Result
Intercom dial tone
Retrieve call
279