Timed Reminder Call - Panasonic DBS576 Section 700 Technical Manual

Feature operation
Hide thumbs Also See for DBS576 Section 700:
Table of Contents

Advertisement

Section 700 - Operation
FF1-2-02: Feature Codes (Walking TRS/Station Lockout Security Code Changing Code)
FF1-0-19: TRS Class Under Station Lockout
FF8-1-08: Walking TRS/Station Lockout Security Code
Considerations
Walking TRS and Station Lockout use the same security code.
You cannot override station lockout using Walking TRS feature.
If you enter an incorrect key code and then try to dial, the phone will issue a busy tone.
If station lockout is set, the phone is limited to the Station Lockout TRS Class outside calling
abilities. This TRS Class should be carefully selected to only allow the desired call types.
Without Walking TRS/Station Lockout Security Code, you cannot set the Station Lockout
feature.

Timed Reminder Call

CPC-96, CPC-288, and CPC-576 All Versions
Description
Your telephone can act as an alarm clock with the Timed Reminder Call feature.
Operation
To set the Timed Reminder Call feature:
1. Lift the handset or press the ON/OFF key.
2. Enter the Timed Reminder Set code (default = *31).
3. Enter the time you want the Timed Reminder Call to sound.
(Enter the time in 24-hour format. For example, 0100 for 1
AM, 1300 for 1 PM.)
4. Replace the handset or press the ON/OFF key.
To cancel the Timed Reminder Call feature:
1. Lift the handset or press the ON/OFF key.
2. Enter the Timed Reminder Cancel code (default = *39).
3. Replace the handset or press the ON/OFF key.
Hardware Requirements
N/A
576-20-700
Action
Action
DBS 576 (USA), issued January 1999
Chapter 6. DSLT Features
Result
Intercom dial tone
Result
Intercom dial tone
261

Advertisement

Table of Contents
loading

Table of Contents